Skip to main content

Resetting the Wi-Fi Connection / Connecting to another Wi-Fi Network

If Atmocube Wi-Fi settings were previously configured and you want to change the Wi-Fi configuration, the Wi-Fi configuration must be reset.

Follow the steps below to reset the Atmocube Wi-Fi configuration and prepare it for Wi-Fi setup:

  1. Press and hold the main button for about 15 seconds until all status indicators on the Atmocube are orange.
    ​

  2. Keep holding the button until all status indicators on the Atmocube begin flashing orange, and then release the button.

  3. After the reset is performed and the Wi-Fi settings are ready to be configured again, the network indicator LED will flash blue, as seen below:

  4. The Atmocube is now in setup mode. Follow Wi-Fi Setup via Mobile App to connect it to a new Wi-Fi network.


​

Related Articles
Did this answer your question?